Reef Line Nylon Weight Belt w Stainless Steel Buckle - 180cm - Y

Reef Line Nylon Weight Belt w Stainless Steel Buckle - 180cm - Yellow. The 180 cm long Reef Line Nylon Webbing Weight Belt with Stainless Steel Buckle is designed to last. The 1.8 metre long and 50 mm (2-inch) wide webbing is manufactured from a very hard-wearing, high-grade nylon for extra long life. It features a reliable, marine-grade, latch-style quick-release Stainless Steel Buckle.

The Reef Line Nylon Webbing Weight Belt with Stainless Steel Buckle is ideal for scuba diving, freediving, spearfishing and snorkelling, plus is ideally priced for divers on a budget. The belt is 180 cm in length allowing you to cut-to-custom length.

You like the independent use of a weight belt instead of weight integrated BCDs because it allows you to use weight when freediving, spearfishing or snorkelling and is thus more versatile. Or maybe you already have a weight belt and prefer having pre-strung belts for various dive situations, or like having a spare. This traditional 2 inch (5 cm) wide nylon webbing weight belt with a corrosive resistant, marine-grade, latch-style, stainless steel buckle is what you need.

You can turn this simple weight belt into a pocket weight belt using Dolphin Tech BCD 2 kg Weight Pockets. Then you have an easy way to adjust the weight you need to keep neutral buoyancy.

Reef Line Nylon Webbing Weightbelt with Stainless Steel Buckle 180cm Features

• Traditional Nylon Webbing Weight belt
• Long Length for Cutting to Custom Length
• Webbing Width: 50 mm (2 inch)
• Webbing Length: 1.8 metre ( (70.8 inch))
• Webbing material: Ultra tough Nylon construction
• Buckle: Latch Style Designed for a Quick Release if needed
• Buckle material: Marine grade stainless steel
• Makes Scuba Diving, Freediving, Spearfishing or Snorkeling More Versatile
• Hard or Soft Weight Pouch Compatible
• Multiple Colour Choices

Webbing Colour: Black, Blue, Orange or Yellow

Technical Tip

Threading a 3-Slot Quick-Release Belt Buckle

Starting from the front of the metal buckle, thread the left waist strap through the larger end slot of the buckle. Position the buckle approximately 45 cm (18 inches) of webbing length from the plate left waist slot. Then thread the webbing from the back through the centre slot and through the front of the inner most slot. Then thread the webbing through the back of the larger end slot so there are two thicknesses of webbing through one slot and pull the weave tight.

For a more complete description please see How to Thread a Weight Belt Buckle.