Shop by Category
Information
This coiled 453 mm (17.8 inch) Medium length Fibre-Optic Cable II from Sea & Sea is for use in underwater photography. It's equipped with two closed 90° Sea & Sea fittings on the ends. One connects to a compatible external strobe, and the other connects to the fibre-optic cable socket on select underwater housings, allowing your strobe to be triggered by the firing of the camera's built-in flash.
It's compatible with all Sea & Sea housings and strobes and is designed for use with the internal Optical YS-Converter. Since the cable is bi-directional, either end may be attached to a housing or strobe.
The best quality Fiber-Optic Cable is composed of 613 fibres (cores). Even when the cable is bent, attenuation of light is minimal. Therefore, the light signal will be transmitted to a strobe without loss. Compared with single fibre cables, the Fiber-Optic Cable II is more resistant to distortion, bending and physical impact.
Specifications:
- Construction: Methacrylic Resin
- Fibre Diameter: 1.5mm / 0.059 inch
- Cable Diameter: 2.7mm / 0.105 inch
- Length: 453mm / 17.8 inches
Drop Ship
This is a regularly stocked item in our Rye dive shop. If we are out of stock it will be ordered for you from the manufacturer upon request and typically shipped directly from them to you the same day thus resulting in no delay in delivery. However, if they are out of stock this item becomes a special order from Europe typically resulting in a 4- to 6-week delay.
Note: This item cannot be delivered outside of Australia.
